Add Device Steps:
1.After the camera is powered on, wait for about 30 seconds and there is a voice prompt “Please use the App for WiFi configuration”. If there is no voice prompt, press and hold the reset button for more than 3 seconds until there is a “beep” or “reset successful” sound, and then the camera makes a voice prompt “Please use the App for WiFi configuration”.
2. Open O-KAM Pro and click the “ + ”icon in the upper right corner of the App to scan the QR code on the camera, or manually select the type of camera to add.
•Wi-Fi Camera
1.Enter the WiFi password for the camera connection (Case sensitive). Please check whether the device supports 5G WiFi.
2.Let the lens face the QR code on the App. Ensure that the QR code is 15-20cm away from the lens when scanning, and try scanning from multi-angles.
3.If the scanning is timed out, or there is no pop-up windows to add a device, please try hotspot configuration.
•Hotspot Configuration
1. According to the prompt of the App, click Connect to connect the camera. Choose the WiFi hotspots starting with @MC/@IPC in the mobile WiFi list, and click Connect;
2. Back to O-KAM Pro and click to add the camera.
Note: When connecting the device to a hotspots starting with @MC/@IPC, the system pops up a window “cannot connect to the internet. Looks like there are other networks available. Switch networks?” Please choose “No thanks”. Keep using this hotspots of the device. If you mistakenly click Switch, delete it from the saved network.
•4G Camera
Let the lens face the QR code on the App; Ensure that the QR code is 15-20cm away from the lens when scanning, and you can try scanning from multi-angles. When the pop-up window to bind device appears, click Bind.
Notes:
1. If your first attempt to add the camera fails, please remember to reset it before your second attempt.